2016 Audi Q5 Lane Departure Warning Retrofit
| rafaelravi | Post by rafaelravi on Nov 28, 2016 19:35:xl GMT not my coding just i did think it would be prissy to share link to original post below Here is the coding and adaptations that I used to actuate Audi Active Lane Assist, I am non making whatever promises or assuming responsibility, code at your own risk, But it worked perfectly for me. I do get a few faults but I think it is due to me trying to actuate Traffic Sign Recognition. UPDATE: Unchecking the option for STA in A5 coding (Byte 16->Bit 5) and you will no longer get the congestion assist fault code. You will become a few bings from your car most Pre Sense Malfunction, these will all go abroad once yous are done. This volition activate the cocky steering, steering cycle vibration, and lane crossing warning. Do all the coding then do adaptations. If using OBDEleven use all the directions but on the left half of the "|" symbol, if using VCDS use all the directions on the right side of the "|". UPDATE: ALL Coding: A5 - Frt Sens. Drv. Help 17 - Dash Lath (One of these may already be on, brand certain both are) 09 - Key Electrics 44 - Steering Assist ALL ADAPTATIONS: 5F - Information Electronics Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning = Set Value to "Activated" Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning_over_threshold_high = Gear up Value to "Activated" Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Set Value to "Activated" Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Gear up Value to "Terminal 15" A5 - Frt Sens. Drv. Assist BAP Personalization = Prepare Value to "Not Activated" Personalization of lane dept. alarm Cl. 15 on = Gear up value to "Last Setting" System way, lane depart. warn, = Set Value to "Option via menu" Switch-on condition, lane depart. warn. = Fix value to "On" (I had to toggle this as this is the final step that I believe mimics pressing the push button to actually activate it. Yous know it was successful when the Lane markings show up in the VC) You tin can tweak the vibration intensity, warning time, and steering effort in these A5 adaptations: UPDATE Directional stabilization assist commuter inact deactiv threshold (3 options) Directional stab. assistance.: intensity: steering wheel vibration (iii options) Directional stab. help.: intensity: ability steering support (three options) www.audiworld.com/forums/a4-b9-platform-give-and-take-212/coding-turning-audi-active-lane-assist-all-cars-pre-sense-2907906/ |
Post by trocoli on Mar 17, 2017 xvi:17:32 GMTI have problem | |
| Deleted Posts: 0 | Mail service by Deleted on Aug 30, 2017 15:40:54 GMT I have problem trocoll check out obdeleven.proboards.com/thread/1783/fix-mistake-codes at that place are some details of error codes that i have seen and fixed. Specifically the U112100 When this was raised with don (VWVortex Thread) he gave some uncomplicated propose "Very difficult to diagnose a general fault code like the 1 in your post from simply the brief information provided. I advise that yous get to the history file for the control module to detect out what changes you fabricated and then revert dorsum the setting to their original values." so I followed this simple propose and at present I don't take an error. What I mostly discover is this error comes when yous have turned something on that the hardware you accept installed does not support the change, and then for case today I turned on Blind Spot detection just dont take the sensors so get this fault. Promise that helps. |
| indu | Post past indu on Oct 21, 2017 23:28:19 GMTAt that place are no values on my motorcar for A5 - Frt Sens. Drv. Assist BAP Personalization = Set Value to "Not Activated" Personalization of lane dept. alert Cl. 15 on = Ready value to "Last Setting" Arrangement mode, lane depart. warn, = Prepare Value to "Selection via carte" Switch-on status, lane depart. warn. = Fix value to "On" (I had to toggle this equally this is the concluding step that I believe mimics pressing the push button to actually activate it. You know information technology was successful when the Lane markings evidence up in the VC) You can tweak the vibration intensity, alert time, and steering effort in these A5 adaptations: UPDATE Directional stabilization assist driver inact deactiv threshold (iii options) Directional stab. aid.: intensity: steering bicycle vibration (3 options) Directional stab. aid.: intensity: power steering support (iii options) |
Mail service past stoofi on Aug 7, 2018 16:16:04 GMTHullo! I take the Audi A4 B9 with pre sense urban center installed. When I use the Active Lane Assist APP in OBDELEVEN (app i and app 2) I get two faults on the nuance: an Active Lane Assist malfuncution and a Pre Sense malfunction. I have tried clearing All faults through OBDELEVEN, but the faults reappear in dash and Lane Assist does not piece of work. 😑😑😑 Would appreciate any suggestions om how to solve. Thanks from Denmark | |
Post by fanfan26 on Aug 7, 2018 21:52:xiv GMT Hi! I have the Audi A4 B9 with pre sense city installed. When I use the Active Lane Aid APP in OBDELEVEN (app 1 and app 2) I become two faults on the dash: an Active Lane Assistance malfuncution and a Pre Sense malfunction. I have tried immigration All faults through OBDELEVEN, but the faults reappear in nuance and Lane Assist does not piece of work. 😑😑😑 Would capeesh any suggestions om how to solve. Thanks from Denmark did you try to install all iii apps, cause you lot have a thrift one , maybe that will articulate the faults | |
Post by 911carrera on Nov 24, 2018 sixteen:28:57 GMTA take the same problem when a try to activate the lane assist with the app . I installed the 2 app'due south and then I get Lane assist malfunction and pre sense malfunction . | |
| vax77 Posts: four | Mail by vax77 on Nov 25, 2018 16:31:27 GMT A have the same trouble when a try to activate the lane assist with the app . I installed the two app'south and then I go Lane assist malfunction and pre sense malfunction . even my two cars have the same problem |
| vax77 Posts: four | Postal service by vax77 on Nov 26, 2018 23:01:42 GMT A have the aforementioned trouble when a endeavor to activate the lane aid with the app . I installed the 2 app's and then I get Lane assistance malfunction and pre sense malfunction . does anyone have the fix for this trouble? |
| Last Edit: Dec iii, 2018 half-dozen:31:09 GMT by vax77 |
Post by andy18 on Jan 2, 2019 nine:18:40 GMTActive lane help works with new app. I take activated on my A4 B9 2016 Model. Just followed the steps. | |
Post by 911carrera on January 26, 2019 23:26:21 GMTIs there a New app for the lane assist ? | |
Post by avaneylen on Jun 15, 2019 eight:32:03 GMTOwning a A4 B9 2019 and having the same problem as stoofi and 911carrera, i'm also getting these two errors when trying to code it. I've tried both ways, through the 'apps' from obdEleven and via the longocing provided in this thread. Hopefully someone comes with a solution for this. | |
Mail by jryacr on Aug 14, 2019 4:32:37 GMT non my coding merely i did think it would exist nice to share link to original post beneath Here is the coding and adaptations that I used to activate Audi Active Lane Assist, I am not making any promises or assuming responsibility, code at your own risk, Merely information technology worked perfectly for me. I practice get a few faults but I think information technology is due to me trying to activate Traffic Sign Recognition. UPDATE: Unchecking the option for STA in A5 coding (Byte 16->Scrap 5) and you will no longer go the congestion assist mistake lawmaking. Y'all will get a few bings from your car about Pre Sense Malfunction, these will all go away once you are done. This will activate the self steering, steering wheel vibration, and lane crossing alert. Practise all the coding and then do adaptations. If using OBDEleven use all the directions simply on the left half of the "|" symbol, if using VCDS use all the directions on the right side of the "|". UPDATE: ALL Coding: A5 - Frt Sens. Drv. Aid 17 - Dash Board (One of these may already exist on, brand certain both are) 09 - Central Electrics 44 - Steering Assistance ALL ADAPTATIONS: 5F - Information Electronics Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning = Set Value to "Activated" Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning_over_threshold_high = Prepare Value to "Activated" Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Fix Value to "Activated" Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to "Concluding 15" A5 - Frt Sens. Drv. Assist BAP Personalization = Set Value to "Non Activated" Personalization of lane dept. warning Cl. 15 on = Fix value to "Final Setting" System style, lane depart. warn, = Set Value to "Option via menu" Switch-on condition, lane depart. warn. = Set value to "On" (I had to toggle this every bit this is the final step that I believe mimics pressing the push to actually actuate information technology. You know it was successful when the Lane markings bear witness up in the VC) You tin tweak the vibration intensity, warning time, and steering effort in these A5 adaptations: UPDATE Directional stabilization aid commuter inact deactiv threshold (3 options) Directional stab. assist.: intensity: steering bicycle vibration (three options) Directional stab. help.: intensity: power steering support (3 options) www.audiworld.com/forums/a4-b9-platform-word-212/coding-turning-audi-active-lane-assist-all-cars-pre-sense-2907906/ | |
Post by nikolapervan on Nov xiii, 2019 11:49:59 GMTIt doesn't work with my machine | |
but I accept managed to activate auto high-beams, and hoped since that worked, the Lane Assist will work as well but unfortunately it gives me errors so I needed to revert dorsum. I lost 300 points in the process, simply OBD11 support restored them back - I'1000 thankful.
Post by rollehjort on Jul 28, 2020 9:37:43 GMTHi I accept the same problem with my 2017 A4. I take first tried to activate Lane Aid through the 2 step in Apps and so getting faults for Lane aid and pre sence. Next step would exist to try doing information technology manual again and see I will work. | |
| Last Edit: Jul 31, 2020 7:24:11 GMT past rollehjort |
DOWNLOAD HERE
2016 Audi Q5 Lane Departure Warning Retrofit
Posted by: joelfrisay.blogspot.com
0 Response to "2016 Audi Q5 Lane Departure Warning Retrofit"
Post a Comment